FREQUENTLY ASKED QUESTIONS: Wave Docks

  1. Canopy total height
  2. We have a wave armor dock section that the top has separated from the bottom. How can we adhere the two peaces back together?
  3. I know you don’t recommend leaving the wave armor dock in for the winter but do you have customers that do? Have they experienced issues? Should I take out the posts? Any recommendations or guidance you can provide the better? It does seem like over the past few years that the dock almost floats up on top of the ice but in the past few years we pulled the posts and floated it by shore because they lower the lake level so it essentially rests on the shore once the lake is lower. One year I had a damaged post brackets because the dock got pushed up against the steel seawall so I am almost thinking it would be best to just leave it there and pull the posts so it can freely move. Thoughths?
  4. Deck and Float Separating
  5. What is the best way to get the H connects out of the dock sections when taking the dock out for the winter?
  6. how wide is the pontoon port, will it fir into a 9′ slip ?
  7. Leave in the Winter ice or bust
  8. Is there an attachment for a winch on the genesis g20 dock?
  9. How much depth is required to load a boat onto the dock? The motor of an I/O needs clearance as it powers onto the dock? How much clearance needed?
  10. EXACTLY where are the holes in the bottom of the Wave Docks located?
  11. Dock attached to canal bottom with 3 poles on side appears to be sinking, how do I bring the dock level?
  12. How hard is the Wave Dock to assemble?
  13. How many post attachments do I need in my dock?

LIKE, COMMENT, SHARE! CONNECT WITH US ON FACEBOOK! 

Like us on Facebook for exclusive info this season!

CONNECT WITH US

Add A Question!

You will get a notification email when Knowledgebase answerd/updated!

+ = Verify Human or Spambot ?